80lb/h Siemens Deka 4 Mototron High Impedance (Long Style) EV1 Connector Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them...

80lb/h Siemens Deka 4 Mototron High Impedance (Long Style) USCAR EV6 Connector Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; maki...

220lb/h Siemens Deka 4 Mototron Low Impedance Gas & Flex Fuel Injectors (Long Style) EV1 Connector Genuine Siemens DEKA IV Mototron 220lb/hour Low Impedance Gas & Flex Fuel Injectors ( Long Style ) These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr inject...

Siemens (Continental) Injector O-ring, Viton B7, Black Used on: -All Siemens DEKA 1, 4 and 7 fuel injectors....

53lb/h Siemens Deka with EV6 / USCAR Connector - Direct fit for SRT , LS2 & LS7 Genuine Siemens DEKA High Impedance Injectors These injectors flow 53.5 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with...

Adapts your Jetronic/Minitimer style harness to USCAR fuel injectors Single-piece design for improved reliability and aesthetics over our competitors adapters...

Adapts USCAR style harness to Jetronic/Minitimer style injector Single-piece design for improved reliability and aesthetics over our competitors adapters...

Adapts USCAR style harness to Jetronic/Minitimer style injector Two-piece design for improved reliability and aesthetics over our competitors adapters...

Universal EV1 (Minitimer) Clip w/ Pigtails...